Communicate with Supplier? Supplier
Lisa Wei Ms. Lisa Wei
What can I do for you?
Chat Now Contact Supplier

Xianfa Roll Forming Machine Factory

Industry Information

Home > Industry Information > Features of roll forming machine

Features of roll forming machine


The mold used in the tile machine requires an upper die and six lower die of the same size. The upper die and one lower die are installed first. The lower die is directly mounted on the hexagonal runner table, and the upper die is mounted on the bottom surface of the slider. And placing a suitable thickness of the backing plate to ensure that the four peripheral gaps are even after the upper and lower molds are closed, and the distance between the upper and lower molds is equal to the thickness of the required blank. Then the upper mold is prevailed, the workbench is indexed, and the remaining five lower molds are installed. After all the upper and lower molds are installed, the brake can be driven. The blanking machine equipment is used to manually place the blank, and the blanking work procedure: Before using the equipment, check whether the connection is firm, whether the mounting bolts and nuts are tightened, and the lubricating oil should be added to the left and right chassis to start the machine for commissioning. Car operation is carefully observed, whether there is vibration, noise, whether the oil window comes to the oil, whether the movement of each component is coordinated, and the mold can be installed after everything is normal. When installing the mold, the power must be cut off, and the motor belt or the large gear should be manually moved to make the work. The table is indexed and the slider is raised to the highest point. It is best to use an object to support between the workbench and the bottom surface of the slide to prevent the accident from falling naturally. Features of the pressing machine: The equipment has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold replacement, etc. The entire unit automation control system adopts a highly integrated network to make the automation system more superior; the equipment adopts high level automatic control. Software, realize production information management. During the process of color plate straightening produced by the pressing machine, the profile will move from top to bottom, left, and right, so that the gap between the straightening mechanism and the profile is relatively loose. There may be a certain gap between the straight mechanism and the upper, lower, left and right surfaces of the profile. The gap size is between 0.010-0.050 in (0.25-1.25 mm). If the torsion is straightened, the gap can be smaller.

Send Inquiry

Lisa Wei

Ms. Lisa Wei


Send Inquiry



Mobile Phone:+8618330769735Contact me with Whatsapp

Address:Industrial Zone, Botou City, Cangzhou, Hebei

Mobile Site